Dragonfly BMS hotend firmware request

[tlr1000604]

Can someone take the latest firmware with 36 point ABL and bump up the nozzle max temp by 20 degrees to maximize use of the all metal hotend for filaments such as nylon?

[xylophoneengine]

Hello tlr,
I believe your problem can be solved by editing these lines in Configuration.h and rebuilding Marlin from this repository using PlatformIO.
Eryone has kindly provided a Video here showing how to build the firmware in this manner.

However, when flashing the firmware using windows, it is of utmost importance that you install the CH340 Drivers for Windows first. Otherwise using the flash tool provided in this repository will not work.

I hope I was of some help.
With best regards,
xylo