NCM109 v1.x for Tubes board NCT4xx and HV5222

[Fossdal]

I got an MCU Board NCM109 v1.x for Tubes board NCT4xx
and it has a HV5222. but the code is not working with this chip

[CDAJoe]

I found the issue during compiling. It is a line of code at line 220 stating SPI_Init where there is no code to call. I copied the Spi initialization from the sample code or codes from other boards for Spi to correct this.

[CDAJoe]

my bad the line is at 280
delete the SPI_Init(); and copy the next into its place moving existing code down. This got my unit working
SPI.begin(); //
SPI.setDataMode (SPI_MODE2); // Mode 2 SPI // судя по данным осциллографа нужно использовать этот режим
SPI.setClockDivider(SPI_CLOCK_DIV8); // SCK = 16MHz/128= 125kHz
//Serial.println(SPCR, BIN);
//SPCR=B00111111;
//Serial.println(SPCR, BIN);