No settings in "Scheduled Jobs"

[amorphous]

Hi Vitor,
I've just installed the extension, but have no settings available on the "Scheduled Jobs" page. Do I have to create the job by hand? Civi doesn't seem to recognise the commands you've given in the documentation.

I'm also not sure of the best way to check whether the extension is running / changing entries. Could you advise as to the order that contacts are updated?

Thanks.

Hello amortphous,

First of all, thank you for using my extension and especially for reporting
this issue you are having.

If the extension install went OK there should be a scheduled job already
set up on your CiviCRM.

If you go to your Scheduled Jobs page in CiviCRM there should be a job
called "Call Contacts.CorrectNameCasesJob API".
You can see the following screenshots for reference.

​

The job is set to run once each day ​and each run it will checks the
capitalisation of 500 contacts. If you wish to modify this value you can
press the "Edit" button. You can set the command parameter
"contactsToCorrectEachRun" to be any value you desire, you just need to be
careful not to overburden your server.
I.e. you can set it to scan 1000 contact each day by setting it
like contactsToCorrectEachRun=1000

​

The way this extension work is as follows:

• Each day the Scheduled Job will scan 500 contacts (default value);
• If the contact has it's first or last name in all lower or upper
  capitalization the name will be corrected.
  -> E.g. 'JAMES morris' or 'James MORRIS' will change to be 'James
  Morris'. 'JAmes Moris' will remain the same.
• The scheduled job will only correct contacts that are individuals and
  will start from the first contact that exists on CiviCRM.
• The job will run until there are any contacts to correct, it will run
  just once per day.
• When the job reaches the end it will stop, and then on the following day
  check if there are any new contacts to correct.

Each time the job run it creates a small report that can seen by pressing
the "View Job Log" button on the job description.
There it will tell you the number of contact it has corrected, the current
offset (i.e. the number of contacts scanned) and the total number of
contacts corrected in the last run.

​

I hope you found this information useful. If you still need some assistance
please don't hesitate to email me again.

Kind regards,

Vitor Nobrega

On 17 November 2014 16:10, amorphous notifications@github.com wrote:

Hi Vitor,
I've just installed the extension, but have no settings available on the
"Scheduled Jobs" page. Do I have to create the job by hand? Civi doesn't
seem to recognise the commands you've given in the documentation.

I'm also not sure of the best way to check whether the extension is
running / changing entries. Could you advise as to the order that contacts
are updated?

Thanks.

—
Reply to this email directly or view it on GitHub
#1.

Vitor Nóbrega

Developer

*Future First *

[image: NEW LOGO SMALL]

020 7239 8933 | vitor@futurefirst.org.uk megan@futurefirst.org.uk |
www.futurefirst.org.uk | @futurefirstorg

Future First, 338 City Road, London, EC1V 2PY

Future First is the public name for The Camden Future First Network, a
registered charity, number 1135638.

Standard disclaimer: this email and any attachments are confidential and
may also be privileged. If you are not the addressee, do not disclose,
copy, circulate or in any other way use or rely on the information
contained in this email or any attachments. If received in error, notify
the sender immediately and delete this email and any attachments from your
system. Emails cannot be guaranteed to be secure or error free as the
message and any attachments could be intercepted, corrupted, lost, delayed,
incomplete or amended. Future First does not accept legal responsibility
for the contents of this message or liability for damage caused by this
email or any attachments. Any views or opinions presented are only those of
the author and not those of Future First.