sriov_interface not binding not able to start instances

[rojohn2]

#vi:syntax=yaml

parameter_defaults:
CloudName: standalone.shiftstack
ContainerCli: podman
Debug: true
DeploymentUser: stack
DnsServers:
- 10.122.3.10

needed for vip & pacemaker

KernelIpNonLocalBind: 1

For OSP16

ExtraSysctlSettings:
net.ipv6.conf.all.forwarding:
value: 1

For OSP17 and beyond

KernelIpv6ConfAllForwarding: 1
DockerInsecureRegistryAddress:
- 192.168.24.2:8787

domain name used by the host

CloudDomain: shiftstack
NeutronDnsDomain: shiftstack
NeutronBridgeMappings: external:br-ex,hostonly:br-hostonly
NeutronFlatNetworks: external,hostonly,hostonly-sriov
NeutronGlobalPhysnetMtu: 1400
OVNCMSOptions: "enable-chassis-as-gw"
NeutronPhysicalDevMappings: "hostonly:ens3f0"
NovaPCIPassthrough:
- vendor_id: "8086"
product_id: "158b"
address: "0000:11:0*.*"
physical_network: "hostonly"
KernelArgs: "intel_iommu=on"
StandaloneEnableRoutedNetworks: false
StandaloneHomeDir: "/home/stack"
InterfaceLocalMtu: 1500
SELinuxMode: permissive

For OSP17+:

StandaloneNetworkConfigTemplate: "/home/stack/dev-install_net_config.yaml"

For OSP16:

StandaloneNetConfigOverride:
network_config:
- {'type': 'ovs_bridge', 'name': 'br-ex', 'use_dhcp': True, 'mtu': 1600, 'ovs_extra': ['br-set-external-id br-ex bridge-id br-ex'], 'members': [{'type': 'interface', 'name': 'ens3f0', 'primary': True, 'mtu': 1600}]}
- {'type': 'ovs_bridge', 'name': 'br-ctlplane', 'use_dhcp': False, 'ovs_extra': ['br-set-external-id br-ctlplane bridge-id br-ctlplane'], 'addresses': [{'ip_netmask': '192.168.24.1/24'}], 'members': [{'type': 'interface', 'name': 'dummy0', 'nm_controlled': True, 'mtu': 1600}]}
- {'type': 'ovs_bridge', 'name': 'br-hostonly', 'use_dhcp': False, 'ovs_extra': ['br-set-external-id br-hostonly bridge-id br-hostonly'], 'addresses': [{'ip_netmask': '192.168.25.1/32'}, {'ip_netmask': '2001:db8::1/64'}], 'routes': [{'destination': '192.168.25.0/24', 'nexthop': '192.168.25.1'}], 'members': [{'type': 'interface', 'name': 'dummy1', 'nm_controlled': True, 'mtu': 1600}]}
- {'type': 'sriov_pf', 'name': 'ens3f0', 'numvfs': 63, 'mtu': 9000, 'use_dhcp': False, 'defroute': False, 'nm_controlled': True, 'hotplug': True, 'promisc': False, 'addresses': [{'ip_netmask': '192.168.26.1/24'}]}
OctaviaGenerateCerts: true
OctaviaCaKeyPassphrase: "secrete"
OctaviaAmphoraSshKeyFile: "/home/stack/octavia.pub"
OctaviaAmphoraImageFilename: "/home/stack/amphora.qcow2"
BarbicanSimpleCryptoGlobalDefault: true
CinderApiPolicies:
cinder-vol-state-set:
key: "volume_extension:volume_admin_actions:reset_status"
value: "rule:admin_or_owner"
cinder-vol-force-detach:
key: "volume_extension:volume_admin_actions:force_detach"
value: "rule:admin_or_owner"

We never want the node to reboot during tripleo deploy, but defer to later

KernelArgsDeferReboot: true
StandaloneExtraGroupVars:
tripleo_kernel_defer_reboot: true

Configure Nova to use preallocated raw disks for consistent storage

performance.

NovaComputeUseCowImages: false
NovaComputeLibvirtPreAllocateImages: space

NtpServer: 10.122.3.10
ContainerImageRegistryCredentials:
registry.redhat.io:
xxx@xxxx.com: 'xxxxx'
ContainerImageRegistryLogin: true

sriov interface is not mapping in nova.conf in nova compute
also how we can add mutiple sriov interfaces