W instead of kW

[WillyBilly90]

My powermeter shows the values devided by 1000:

This is what is shows:
Successfully fetched HomeAssistant powermeter value (filter 0.0.0.0/0): -0.215W | 0.651W | 0.001W

It should be this:
Successfully fetched HomeAssistant powermeter value (filter 0.0.0.0/0): -0.215kW | 0.651kW | 0.001kW

How can I change this?

[tomquist]

You can create a helper for each entity that converts from kW to W, something like this:

1. Go to Settings → Devices & Services → Helpers
2. Click "Add Helper" (+ button)
3. Choose "Template"
4. Name it e.g. "Power in Watts"
5. Set unit to "W"
6. Enter template: {{ states('sensor.power_in_kilowatts') | float * 1000 }}
7. Click "Create"

Repeat that for every sensor, then use the entity ID of the helpers for the b2500-meter Addon config.

[WillyBilly90]

That works. Thanks for your help!

[rcourtman]

Pulse already supports NFS backups. It automatically detects and displays backups from any Proxmox storage that has 'backup' in its content types, including NFS shares.

If you're not seeing your NFS backups in Pulse:

1. Make sure your NFS storage in Proxmox has 'VZDump backup file' enabled in the content types
2. Ensure your API token has the Datastore.Allocate permission (as discovered in issue MODBUS configuration #172)
3. Try the latest version v3.31.0 which has improved backup detection

Your NFS backups should appear in the Backups tab under 'PVE Backups' section, not under PBS.