ASoC: Intel: soc-acpi-intel-lnl-match: adds RT714 and RT1318 devices … #8
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
macchian
force-pushed
the
mac-dev-lnl-sdw
branch
2 times, most recently
from
133fd64 to
b931851
Compare
This patch adds support for corresponding codecs on LNL hardware configuration: SDW0: RT714 DMIC SDW1: RT1318 Left Speaker SDW2: RT1318 Right Speaker Signed-off-by: Mac Chiang <mac.chiang@intel.com>
macchian
force-pushed
the
mac-dev-lnl-sdw
branch
from
b931851 to
3bd52fc
Compare
macchian
pushed a commit
that referenced
this pull request
Apr 7, 2025
napi_schedule() is expected to be called either: * From an interrupt, where raised softirqs are handled on IRQ exit * From a softirq disabled section, where raised softirqs are handled on the next call to local_bh_enable(). * From a softirq handler, where raised softirqs are handled on the next round in do_softirq(), or further deferred to a dedicated kthread. Other bare tasks context may end up ignoring the raised NET_RX vector until the next random softirq handling opportunity, which may not happen before a while if the CPU goes idle afterwards with the tick stopped. Such "misuses" have been detected on several places thanks to messages of the kind: "NOHZ tick-stop error: local softirq work is pending, handler #8!!!" For example: __raise_softirq_irqoff __napi_schedule rtl8152_runtime_resume.isra.0 rtl8152_resume usb_resume_interface.isra.0 usb_resume_both __rpm_callback rpm_callback rpm_resume __pm_runtime_resume usb_autoresume_device usb_remote_wakeup hub_event process_one_work worker_thread kthread ret_from_fork ret_from_fork_asm And also: * drivers/net/usb/r8152.c::rtl_work_func_t * drivers/net/netdevsim/netdev.c::nsim_start_xmit There is a long history of issues of this kind: 019edd0 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 3300685 ("idpf: disable local BH when scheduling napi for marker packets") e3d5d70 ("net: lan78xx: fix "softirq work is pending" error") e55c27e ("mt76: mt7615: add missing bh-disable around rx napi schedule") c0182aa ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule") 970be1d ("mt76: disable BH around napi_schedule() calls") 019edd0 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 30bfec4 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt") e63052a ("mlx5e: add add missing BH locking around napi_schdule()") 83a0c6e ("i40e: Invoke softirqs after napi_reschedule") bd4ce94 ("mlx4: Invoke softirqs after napi_reschedule") 8cf699e ("mlx4: do not call napi_schedule() without care") ec13ee8 ("virtio_net: invoke softirqs after __napi_schedule") This shows that relying on the caller to arrange a proper context for the softirqs to be handled while calling napi_schedule() is very fragile and error prone. Also fixing them can also prove challenging if the caller may be called from different kinds of contexts. Therefore fix this from napi_schedule() itself with waking up ksoftirqd when softirqs are raised from task contexts. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/ Cc: Breno Leitao <leitao@debian.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
macchian
pushed a commit
that referenced
this pull request
Aug 25, 2025
It is reported that on Acer Nitro V15 suspend only works properly if the keyboard backlight is turned off. In looking through the issue Acer Nitro V15 has a GPIO (#8) specified in _AEI but it has no matching notify device in _EVT. The values for GPIO #8 change as keyboard backlight is turned on and off. This makes it seem that GPIO #8 is actually supposed to be solely for keyboard backlight. Turning off the interrupt for this GPIO fixes the issue. Add a quirk that does just that. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4169 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Mika Westerberg <westeri@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
macchian
pushed a commit
that referenced
this pull request
Aug 25, 2025
A crash in conntrack was reported while trying to unlink the conntrack
entry from the hash bucket list:
[exception RIP: __nf_ct_delete_from_lists+172]
[..]
#7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack]
#8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack]
#9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack]
[..]
The nf_conn struct is marked as allocated from slab but appears to be in
a partially initialised state:
ct hlist pointer is garbage; looks like the ct hash value
(hence crash).
ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected
ct->timeout is 30000 (=30s), which is unexpected.
Everything else looks like normal udp conntrack entry. If we ignore
ct->status and pretend its 0, the entry matches those that are newly
allocated but not yet inserted into the hash:
- ct hlist pointers are overloaded and store/cache the raw tuple hash
- ct->timeout matches the relative time expected for a new udp flow
rather than the absolute 'jiffies' value.
If it were not for the presence of IPS_CONFIRMED,
__nf_conntrack_find_get() would have skipped the entry.
Theory is that we did hit following race:
cpu x cpu y cpu z
found entry E found entry E
E is expired <preemption>
nf_ct_delete()
return E to rcu slab
init_conntrack
E is re-inited,
ct->status set to 0
reply tuplehash hnnode.pprev
stores hash value.
cpu y found E right before it was deleted on cpu x.
E is now re-inited on cpu z. cpu y was preempted before
checking for expiry and/or confirm bit.
->refcnt set to 1
E now owned by skb
->timeout set to 30000
If cpu y were to resume now, it would observe E as
expired but would skip E due to missing CONFIRMED bit.
nf_conntrack_confirm gets called
sets: ct->status |= CONFIRMED
This is wrong: E is not yet added
to hashtable.
cpu y resumes, it observes E as expired but CONFIRMED:
<resumes>
nf_ct_expired()
-> yes (ct->timeout is 30s)
confirmed bit set.
cpu y will try to delete E from the hashtable:
nf_ct_delete() -> set DYING bit
__nf_ct_delete_from_lists
Even this scenario doesn't guarantee a crash:
cpu z still holds the table bucket lock(s) so y blocks:
wait for spinlock held by z
CONFIRMED is set but there is no
guarantee ct will be added to hash:
"chaintoolong" or "clash resolution"
logic both skip the insert step.
reply hnnode.pprev still stores the
hash value.
unlocks spinlock
return NF_DROP
<unblocks, then
crashes on hlist_nulls_del_rcu pprev>
In case CPU z does insert the entry into the hashtable, cpu y will unlink
E again right away but no crash occurs.
Without 'cpu y' race, 'garbage' hlist is of no consequence:
ct refcnt remains at 1, eventually skb will be free'd and E gets
destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy.
To resolve this, move the IPS_CONFIRMED assignment after the table
insertion but before the unlock.
Pablo points out that the confirm-bit-store could be reordered to happen
before hlist add resp. the timeout fixup, so switch to set_bit and
before_atomic memory barrier to prevent this.
It doesn't matter if other CPUs can observe a newly inserted entry right
before the CONFIRMED bit was set:
Such event cannot be distinguished from above "E is the old incarnation"
case: the entry will be skipped.
Also change nf_ct_should_gc() to first check the confirmed bit.
The gc sequence is:
1. Check if entry has expired, if not skip to next entry
2. Obtain a reference to the expired entry.
3. Call nf_ct_should_gc() to double-check step 1.
nf_ct_should_gc() is thus called only for entries that already failed an
expiry check. After this patch, once the confirmed bit check passes
ct->timeout has been altered to reflect the absolute 'best before' date
instead of a relative time. Step 3 will therefore not remove the entry.
Without this change to nf_ct_should_gc() we could still get this sequence:
1. Check if entry has expired.
2. Obtain a reference.
3. Call nf_ct_should_gc() to double-check step 1:
4 - entry is still observed as expired
5 - meanwhile, ct->timeout is corrected to absolute value on other CPU
and confirm bit gets set
6 - confirm bit is seen
7 - valid entry is removed again
First do check 6), then 4) so the gc expiry check always picks up either
confirmed bit unset (entry gets skipped) or expiry re-check failure for
re-inited conntrack objects.
This change cannot be backported to releases before 5.19. Without
commit 8a75a2c ("netfilter: conntrack: remove unconfirmed list")
|= IPS_CONFIRMED line cannot be moved without further changes.
Cc: Razvan Cojocaru <rzvncj@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20250627142758.25664-1-fw@strlen.de/
Link: https://lore.kernel.org/netfilter-devel/4239da15-83ff-4ca4-939d-faef283471bb@gmail.com/
Fixes: 1397af5 ("netfilter: conntrack: remove the percpu dying list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This patch adds support for corresponding codecs on LNL hardware configuration:
SDW0: RT714 DMIC
SDW1: RT1318 Left Speaker
SDW2: RT1318 Right Speaker